+ Reply to Thread
Results 1 to 10 of 128

Thread: adjust cya before or after shocking

Hybrid View

  1. #1
    Kateyru is offline Subscriber Thread Analyst Kateyru 0
    Join Date
    Apr 2012
    Location
    Alabama
    Posts
    110

    Default Re: adjust cya before or after shocking

    No apologies needed, you didn't sound dismissive...I just know I'll need a little more handholding.
    I must have been testing while you were posting. Results are FC = 4.5 (sunny day), pH = 7.3, TA = 80 (bright pink color, I wouldn't call it red)
    Dissolve on top of sand??? not sure what that means...dose the dichlor in the skimmer basket at the pump versus in skimmer at the pool? Wherever I put it, does all go in at one time?
    I run the timer about 8 hours a day. It would be somewhat difficult to divide the run time for the next couple of days (due to work schedule).
    re: sock for granular cya...a real sock or is there a pool sock?
    16'x30' rectangle 22K gal IG vinyl pool; SWCG; Hayward Pro SEries S220T sand filter; Hayward pump; hrs; Taylor K-2006 ; city; PF:5.5

  2. #2
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,932

    Default Re: adjust cya before or after shocking

    When the TA test changes (in one or two drops) from green to Red / intense pink you're there. 80 sounds pretty good.
    I meant puttng it in the pool skimmer - it then goes through the pipe, through the pump then onto the sand. As far "as all at once" - slowly into the skimmer, you don't want a big chunk to clog your pipes or pump.
    if you've only one run period a day, best to add the dichlor at the beginning of the pump run. I wouldn't pour it in the skimmer if the pump is not running and neither should you.
    I've used a nylon stocking doubled over - some people use tube socks.
    So... FC 4.5 on a sunny day - loss of 2.5 today. Another 2.5 puts you below your minimum. I'd dose with a pound of dichlor. You'll need to add Borax after that to lift pH.
    12'x24' oval 7.7K gal AG vinyl pool; ; Hayward S270T sand filter; Hayward EcoStar SP3400VSP pump; hrs; K-2006; PF:16

  3. #3
    Kateyru is offline Subscriber Thread Analyst Kateyru 0
    Join Date
    Apr 2012
    Location
    Alabama
    Posts
    110

    Default Re: adjust cya before or after shocking

    Ok, I'll put in a lb. of dichlor 1st thing tomorrow morning then check FC and pH later in the day.
    thanks.
    16'x30' rectangle 22K gal IG vinyl pool; SWCG; Hayward Pro SEries S220T sand filter; Hayward pump; hrs; Taylor K-2006 ; city; PF:5.5

  4. #4
    Kateyru is offline Subscriber Thread Analyst Kateyru 0
    Join Date
    Apr 2012
    Location
    Alabama
    Posts
    110

    Default Re: adjust cya before or after shocking

    I have a question. I'm at the point where I am adding CYA (granular) to pool water. It's in a stocking and hanging in front of a return as of late yesterday afternoon. Do I need to run the filter/pump 24/7 while CYA dissolves or just run the usual 8 hours? Btw, water is looking good, and FC = 5 and pH = 7.6 per most recent test.
    Thanks.
    16'x30' rectangle 22K gal IG vinyl pool; SWCG; Hayward Pro SEries S220T sand filter; Hayward pump; hrs; Taylor K-2006 ; city; PF:5.5

  5. #5
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,932

    Default Re: adjust cya before or after shocking

    Hey, happy to hear from you, I'd been wondering how the algea battle finished up. Glad to hear it's looking good.
    Run your pump on it's regular schedule. Give the sock a squeeze now and again to help it along.
    12'x24' oval 7.7K gal AG vinyl pool; ; Hayward S270T sand filter; Hayward EcoStar SP3400VSP pump; hrs; K-2006; PF:16

  6. #6
    Kateyru is offline Subscriber Thread Analyst Kateyru 0
    Join Date
    Apr 2012
    Location
    Alabama
    Posts
    110

    Default Re: adjust cya before or after shocking

    Good, glad I can cut back on pump time, and I'll squeeze prn. Many thanks again for all the help!!
    16'x30' rectangle 22K gal IG vinyl pool; SWCG; Hayward Pro SEries S220T sand filter; Hayward pump; hrs; Taylor K-2006 ; city; PF:5.5

  7. #7
    Kateyru is offline Subscriber Thread Analyst Kateyru 0
    Join Date
    Apr 2012
    Location
    Alabama
    Posts
    110

    Default Re: adjust cya before or after shocking

    Well, I'm back with another question...I just tested (5:45 pm) and got FC = 11.5 and pH = 7.6 (holding steady). My FC is up from 5 in 48 hours. I added salt and may have gotten a little heavy-handed. Hayward recs 2700-3400 and I'm at 3900. I'd set SWG at 45%. Is the FC up because of too much salt or is % too high? Other thoughts?
    Thanks.
    16'x30' rectangle 22K gal IG vinyl pool; SWCG; Hayward Pro SEries S220T sand filter; Hayward pump; hrs; Taylor K-2006 ; city; PF:5.5

+ Reply to Thread

Similar Threads

  1. How to adjust CYA down
    By l8nite4me in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 06-13-2007, 04:27 PM
  2. How to Adjust pH and TA
    By iwannapool in forum Testing and Adjusting Pool Water Chemistry
    Replies: 2
    Last Post: 05-15-2007, 05:22 PM
  3. What should I adjust ?
    By aswetich in forum DPD-FAS based testing
    Replies: 6
    Last Post: 07-27-2006, 07:33 PM
  4. Adjust TA first, right?
    By jnorris in forum Dealing with Alkalinity and Calcium
    Replies: 12
    Last Post: 06-30-2006, 11:07 AM
  5. Which one should I adjust first
    By Sunny32504 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 10
    Last Post: 05-23-2006, 01:32 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts