So assuming you have the JEP2.0 pump and typical 2" plumbing, then the flow rate should be around:
Flow Rate (GPM) =RPM / 37
The most efficient setting is around 800 RPM or 22 GPM which also happens to be a 24 hour turnover.
Re: Second Thoughts about In-Ground Pool Installation
So assuming you have the JEP2.0 pump and typical 2" plumbing, then the flow rate should be around:
Flow Rate (GPM) =RPM / 37
The most efficient setting is around 800 RPM or 22 GPM which also happens to be a 24 hour turnover.
Mark
Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater
Posting Permissions
Reply With Quote
Bookmarks