Questions on changing to a 2 speed motor on a Hayward Super II pump

[PoolDoc]

Oops. Sorry. Got threads confused -- I'm dealing with 3 similar threads!

Lemme reset. OK, re-read you thread to make sure I knew where I was.

If you want to simply put your pool on hold, till you get all new gear, we can help you do that.

BUT, if you want to USE your pool before then, do this:
1. Get a new Unicel cartridge, but do NOT install it.
2. Pipe a bypass around your filter, and put a 1/2lb spring check on the filter line, and a 5lb spring check + a valve on the bypass line
3. Then, install the Unicel. That way, your bypass line will move excess flow AROUND the filter, when it gets dirty, so you won't destroy the cartridge.

Surprisingly, Amazon has US made cheap calibrated check valves you can use. I'll post the links if you want to pursue this.

[keastman]

Thanks for the bypass info Ben, I've already picked up a used Jandy cl-320 cart filter to replace mine with, I"m just gong to make a final decision on ordering a new motor, or new pump and get to work plumbing it all in. The pool is functioning as is and will do OK until I can set aside a day to install the filter and motor or new pump.