+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 11 to 15 of 15

Thread: What pump and filter?

  1. #11
    Join Date
    Mar 2012
    Location
    Eastern NC
    Posts
    9

    Default Re: What pump and filter?

    Ok, it looks like I have my mind made up on a sand filter. Thanks for all of your help Mark. I am going to go with this one.

    PNSD0060DO2260 1-1/2* HP Dual Speed
    2.3 sq. ft. effective filtration area
    250# sand filter

    Any suggestions on where to buy? I saw one that was priced good, but almost too good. Is there someone that the forum suggest we use (poolforum.com partner)?

    I feel confident about the filter type. I couldnt find specs on uprated or full or anything like that, so with your expertise is this an energy efficient and quality pump that would be powerful enough for backwashing and vacuuming and strong enough for turnover? If so, I am moving on to the pool.

  2. #12
    Join Date
    Mar 2012
    Location
    Eastern NC
    Posts
    9

    Default Re: What pump and filter?

    Lastly, will I need anything else to go with this? If I purchase that pump/filter combo, and buy a pool that comes with the pool/liner/skimmer, I am ready to go correct? (of course I need blocks and sand) I just wanted to make sure there werent any missing pieces I was forgetting. I have the electricity worked out, will level the site meticulously, and think all the hoses i need come with the pump (it says a 6' hose kit). I am excited about moving on to the pool selection.

  3. #13
    mas985's Avatar
    mas985 is offline Lifetime Member Whizbang Spinner mas985 3 stars mas985 3 stars mas985 3 stars
    Join Date
    Dec 2004
    Location
    Pleasanton, CA
    Posts
    1,423

    Default Re: What pump and filter?

    Yes, the pump is more than big enough for all your needs. Efficiency will be much better on low speed so try to run it as much as possible on low speed and only use high speed when absolutely necessary.
    Mark
    Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
    18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater

  4. #14
    Join Date
    Mar 2012
    Location
    GA
    Posts
    3

    Default Re: What pump and filter?

    I will be constructing the same as jrh1010 and have the same questions. Curious 1010 what you finally settled on

  5. #15
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: What pump and filter?

    Quote Originally Posted by jrh1010 View Post
    Any suggestions on where to buy? I saw one that was priced good, but almost too good. Is there someone that the forum suggest we use (poolforum.com partner)?
    No partner or recommended source.

    I will note that I've personally used A1PoolParts.com several times, for items I needed for customers locally, and they were cheaper -- selling retail -- than I could buy 'wholesale' from SCP. It was easy to reach someone knowledgeable, and my purchases went well. Of course, that's a small sample, so I'm not 'recommending' them, as much as 'reporting' my own experience.

    Or not. Just checked -- their supply of AG pool equipment (which I don't deal with, locally) is not great. They are in California, and California, like Florida, is a predominantly in-ground market.

+ Reply to Thread

Similar Threads

  1. Is it possible to run Intex SWCG pump and filter unit with pump disabled?
    By jtran69 in forum Intex-type Pool Setup & Operations
    Replies: 2
    Last Post: 08-19-2012, 09:15 AM
  2. New Pump and Filter
    By darkstar32448 in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 03-06-2012, 05:36 PM
  3. need new filter, may have a pump
    By illinipdx in forum Pool Equipment & Operations
    Replies: 8
    Last Post: 07-06-2008, 05:15 PM
  4. Is my pump too big for my filter?
    By AndieP in forum Pool Equipment & Operations
    Replies: 4
    Last Post: 07-06-2006, 12:29 AM
  5. Anyone know where to buy Filter/pump combo with 2 speed pump?
    By poolbuoy in forum Above-Ground Pool Construction & Repair
    Replies: 3
    Last Post: 05-13-2006, 08:25 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts