Thanks for all of the advice so far. Let me say I DID NOT ADD the Sodium Bromide. I was waiting for advice from the forum here before I added anything other than straight bleach. Let me know ASAP if your advice changes based on the fact that I DID NOT add the Sodium Bromide.

1. Salt cell SmartPure Sanitizer II - Blue Haven.
2. Control panel is Goldline Controls PL-P-4-X288.
3. Pool store tested the salt level the first time I went in on the 27th, but not 2nd time on the 6th. Salt level on the 27th was 3900ppm. Too high I am sure. I added because my control panel said salt was too low, and like an idiot I added salt without doing a manual test of the salt level.
4. Mustard Eliminator they gave me is 99% Sodium Bromide. I did NOT put any in. I will be returning it along with the clarifier they sold me.
5. I have my own test kit. So I can also test the water myself, no problem. Kit I have is Taylor K-1005 iCare Residential Pool & Spa Test Kit.

Thanks for your help. Looking forward to additional recommendations.

Darren