I can't help you directly. If I were in your situation, I'd just go to my local SCP (wholesaler) and say, I need "this & this and this", and they'd go get it. But you can't do this.

You might look at this,


from this site:
http://www.a1poolparts.com/-strse-87...ump/Detail.bok

I've ordered from them myself, and they've done OK, seemed knowledgeable, and had a good supply of parts on hand. The picture is of an Aladdin kit, which is NOT OEM, but not no-name either. You could try it, or try to order the equivalent in actual Hayward parts.

Either way, CALL them -- don't order online -- and TALK to someone who's familiar with the pump. Or better, if you have a decent pool store nearby, go talk to them. Helping customers find and buy the correct pool parts is a REAL service they often provide and in an entirely different category than pushing expensive and unnecessary chemical 'solutions'.

By the way, be careful with that "Magic Lube". It's very goo-ey and hard to remove. Don't use it on the lid O-ring, or every bit of dirt that ever touches that ring will stick. Or, you can put it on and then try (you won't succeed!) to wipe it all off. That will leave about the right amount on that lid O-ring.)