All right guys....I thought i've been doing good keeping my pool nice & balanced, well not so sure My water is clean & crystal clear but here are my newest readings from about noon today:
TH:0
FC:3
PH:7.5-7.8
TA:180-190
CYA:50
Now i've read that harness isn't really needed in a vinyl pool, but none at all?? when i put in the blue drops & swirled it around instead of turning blue it turned a light yellow or clear color, then as it sat for a while it turned red without adding the titrant. Freaked me out because the pool looks great & i thought i was doing so well. Also the TA is a bit scary, i just kept adding & adding those drops waiting for it to turn red. I got to 18 & it turned a very slight red then i added 1 more drop & became a more noticible red. But isn't that a bit high?? The PH side on the test kit is a lil darker than usual, which usually runs at a 7.5 so i guess it would be closer to a 7.8, but from what i gather that PH is an ok level. Please any advice would help me out, i'm freaking out about my numbers being a bit off, just let me know if this is ok & if not how i could get it back to what it was! I didn't add any bleach last night so my chlorine is a bit low, but toniight i will add about 47oz to get it back up to about a 6. Please let me know if i should add anything else. Thanks