+ Reply to Thread
Page 4 of 7 FirstFirst ... 2 3 4 5 6 ... LastLast
Results 31 to 40 of 66

Thread: just got good test kit. HELP PLEASE

  1. #31
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: just got good test kit. HELP PLEASE

    Hi Shub;

    Different strokes, and all that. For some of our users once the wife lays down the law, the discussion's over.

    OK, you've added a bit of information I didn't have before (maybe I overlooked it?). Anyhow, it is ABSOLUTELY NORMAL for a pool that's being used regularly to get cloudy overnight if the chlorine drops to zero the preceding day, ESPECIALLY when you have heavy lotion users, using the pool. To prevent that, you MUST keep the chlorine above the minimum level shown in the Best Guess chart -- if you haven't read that page, you really should do so -- for YOUR CYA level, whatever it is.

    Currently, with your CYA at 100, that means the MINIMUM allowable level is 8 ppm.

    Without considering your wife's preference, here's what I would recommend you do:
    + Hold your current levels for 2 days AFTER the last trace of any algae. (You may already be past that.)
    + Once you've gone 2 days with NO algae, and no slipperiness on the sidewalls, let the chlorine drop to 10 ppm.
    + When the chlorine drops to 8 - 10 ppm, add 2 gallons of plain 6% bleach that evening. Test chlorine daily (for now) and repeat the 2 gallon dose in the evening of each day you see a level below 10 ppm FC.
    + Meanwhile, use muriatic acid to drop your pH to just below 7.0. Let it rise to 7.4 (it will); repeat the acid dose when it reaches 7.4. This will gradually lower your TA.
    + If you want to do so, you can ALSO raise the borate (borax) level in your pool to 60 ppm or so. This will make your pool more resistant to algae, but NOT to lotion / urine / body oil based cloudiness. Let me know if you want to do so -- it will take 16 boxes of 20 mule team borax and around 4 gallons of muriatic acid if you want to do this.
    + Do what you can to eliminate peeing in the pool - for a lot of boys, it's as simple as giving them permission to "pee behind that bush over there"! Urine really does use up a lot of chlorine.

  2. #32
    Join Date
    Jul 2011
    Location
    Williamsport PA
    Posts
    61

    Default Re: just got good test kit. HELP PLEASE

    past steps 1 and 2
    If i havent killed the invisable algae problem will i get another bloom quick if i drop below 10ppm, say 5 by accident
    I dumped 4gl of acid now to begin aerating.
    Havent lowered yet so no added borax
    Do i need additional acid and borax to increase borates after im done aerating and returned normal to PH
    Hope i dont sound like too much of an idiot. I stress alot over the pool. And am impatient. Thanks for your help

  3. #33
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: just got good test kit. HELP PLEASE

    Quote Originally Posted by shub_31 View Post
    If i haven't killed the invisible algae problem will i get another bloom quick if i drop below 10ppm, say 5 by accident
    It's certainly possible. Usually, when people drop below what they should, they get lower than they think, for longer than they think. What I've told my commercial customers for years, that if the chlorine gets below 0.5 ppm (on pools with CYA=30), the pool WILL be cloudy the next day. Usually, it is.

    In warm weather, pools need to be EFFECTIVELY chlorinated 100% of the time; not 95% or even 99% of the time.

    I dumped 4gl of acid now to begin aerating.
    Use the dilution with distilled water method to check your pH NOW!!

    You do NOT want to get below 6.0 at ALL. It WILL damage your liner. If it is low, go get 10 boxes or so of borax, and add 2 to start, and then 1 every hour till you get back up above 7.0. (You have to go above 7 because your kit can't distinguish 6.8 from 5.8!)


    Do i need additional acid and borax to increase borates after im done aerating and returned normal to PH
    Yes. Acid use to lower pH from borax is separate from acid use to lower TA. However, any borax you've added this season for ANY purpose counts toward the total.

    Hope i don't sound like too much of an idiot. I stress a lot over the pool. And am impatient. Thanks for your help
    Nah, pretty much normal for a nervous pool owner.

  4. #34
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: just got good test kit. HELP PLEASE

    Quote Originally Posted by PoolDoc View Post
    For some of our users once the wife lays down the law, the discussion's over.
    Only some you say? What's wrong with the rest of them?? I can't figure that one out!


    Shub --- never add a big dose of anything at one time -- except bleach when you are shocking the pool. Of everything else, it is always better to use smaller doses and gradually get to targets than risk overshooting them.

  5. #35
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: just got good test kit. HELP PLEASE

    Snort!

  6. #36
    Join Date
    Jul 2011
    Location
    Williamsport PA
    Posts
    61

    Default Re: just got good test kit. HELP PLEASE

    Ok. Added 1 1/2 box of borax. Took ph to 7.0. Still aerating with 50ppm reduction in TA based on 250ppm earlier. Pretty much no sun today, sum, 91F. Check FF with dilution and appears to be 28-30ppm. It may be holding. Crossing fingers.

  7. #37
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: just got good test kit. HELP PLEASE

    Good!.

  8. #38
    Join Date
    Jul 2011
    Location
    Williamsport PA
    Posts
    61

    Default Re: just got good test kit. HELP PLEASE

    im trying to upload some picture for you to see but not having much luck. best i did was profile pic

  9. #39
    Join Date
    Jul 2011
    Location
    Williamsport PA
    Posts
    61

    Default Re: just got good test kit. HELP PLEASE

    i figured it out. I posted pics in the gallery titled pics for everyone who helped SHUB Please feel free to move them here if u can thanks

  10. #40
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: just got good test kit. HELP PLEASE

    Email them to me - the vBulletin attachment function loses pictures every time I upgrade, and I'm sick of it.

    Sent them to poolforum AT gmail DOT com

+ Reply to Thread

Similar Threads

  1. looking for a good test kit
    By ynotme in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 06-13-2013, 12:14 PM
  2. Test results - look good?
    By handy1 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 06-24-2012, 09:17 AM
  3. Good test kit
    By Jinx32 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 07-09-2007, 02:03 PM
  4. where can I buy a good Pool test kit?
    By tagprod in forum Testing and Adjusting Pool Water Chemistry
    Replies: 8
    Last Post: 09-12-2006, 08:30 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts