Okey doke....getting highly aggrivated now! Went home yesterday and pulled pump/motor apart again. I build car motors for a hobby, so doing clean work is something I'm used to doing. I pulled everything apart on the bench and cleaned everything. Once again making sure I didn't touch the seals. I replaced ALL of the seals and gaskets in the whole pump. Put it all back together and it still leaking water. Now I'm baffled. I do think I was sold aftermarket seals....maybe the cause??? I'm close to just buying a new pump but wish I would have done that before I bought the new motor. The unit is pretty old, I believe it was installed in 92-93 sometime. Thoughts?? Thanks guys!!