Tested the water at 1:25 pm (wasn't able to test early in the am today):
FC - 1.5 ppm
CC - 0.5 ppm
PH - 7.8
TA - 120 ppm
CH - 180 ppm
CYA - 25 ppm (the black dot disappeared at the very top of the test tube so I believe it to be approximately 25 ppm)
I added the same amount of bleach I did yesterday. Bought some additional CYA to add via the sock method. About 3 pounds of it sound right? That will also drop the PH a bit and bring it where it needs to be correct? What about the TA and CH numbers?
Anything else?
you guys rock
Bookmarks