ricky -- Programming an AutoPilot DIG 220

[ricky]

autopilot took a lightning hit. i replaced it with a new DIG 220. Then the pump went out so I replaced it with a new hayward 1hp pump/motor. everything works but I can't get the new DIG 220 programmed. How do I set up the salt level and water temp. it keeps saying check flow, purifier off. The cell was not replaced due to it being in such good shape.. ie no scale what so ever. the cell is a SC 36;

[PoolDoc]

I can't help you with that, but I'll move your post into the SWCG section.

[Poolsean]

You're best contacting AutoPilot, 727-823-5642, and having customer service help you. Do you have the owners manual?
Are you controlling your pump through the DIG-220 or to a time clock?