Another algae question

[jstkiddn]

Always those that ruin it for the rest of us. Thanks spammers. But I understand you gotta do what you gotta do to keep them at bay. :sigh:

I'm just trying to find some info on sediment I can't get rid of in my pool (think it may be dead algea or "algea dust"?) and just wanted to do some reading. I'm sure my question has been answered before, but I can't get there until I do my time? LOL

But just wanted to post that I am a real person! At least I think I am.

[Watermom]

Hey there jstkiddn! If you want to tell us about your pool and give us some current water testing results taken with a drops-based kit, we can see what we can do to help you clear up your pool. Also, tell us what kind of pool, type of filter and size of pump you have.

By the way, if you log out, you can see more of the forums. You can also do a google search. Look for the link in my signature line below.

Welcome to the forum!

[PoolDoc]

Solving apparent algae dust problems depends on the filter type, and what the dust is. For starters, what type of filter do you have?

[jstkiddn]

Hi and thanks!! Will update later with exact water test results. Only have strips but can pick up drop based kit this afternoon. Hopefully can order the good kit online soon, but hoping the locally purchased one can get me started.

For starters:

Approx. 28,000 - 30,000 gallon??? in ground vinyl liner. Can't exactly remember the gallons but it's this pool minus waterfall and spa: http://www.foxpool.com/DesignAndPlan...pageName=Ionic

Salt water pool. Pool Pilot. Sand filter. PENTAIR SUPERFLO 1 1/2 HP SWIMMING POOL PUMP

Took the cover off to find a swamp. Have managed to clear the green with shock and then hubby used some sort of clarifier. I used baking soda to bring PH/Alk into range (according to strips)

Pool is cloudy and milky looking. There appears to be a lot of sediment on the bottom. Some is brownish, but other stuff you really don't even notice until you see it moving around....so it's a lighter color. When I vacuum I have to be VERY careful or it just all gets stirred up into the water. I'm thinking one big mistake so far is that I have been vacuuming to filter intead of to waste. Read something that led be to believe that I may just be putting it right back into the pool.

Frustrated as heck! We've had the pool 6 or 7 years and have NEVER had this much trouble getting it going! My poor daughter looks pretty pitiful playing in the sprinkler while she has a lovely in-ground pool in her back yard. LOL

edit to add: Just spent a bit of time vacuuming to waste. Naturally couldn't do for very long as the water got too low fairly quick. Refilling now, which I'm sure is going to really change the levels of everything in pool. UGH! Will refill, test with WallyWorld kit and post later. I'm sure you guys can lead me in the right direction. I'm about ready to bang my head against a wall.

[jstkiddn]

Bought the Taylor test kit today from Amazon, but in the meantime also bought an HTH kit locally. Results are as follows:

Cl - 1 ppm
pH - somewhere between 7.8 and 8.2. I had a really hard time deciding on this one. At first I thought it matched the 7.8 color pretty close. But the more I looked at it I think it MAY be a bit darker than that....but not as dark as 8.2.
Alk - 10 drops x 10 = 100 ppm
CYA - Another I had a hard time deciding. Approx. 35 ppm.

Pool is some better after vacuuming to waste earlier today, but still cloudy. I can finally see the main drain! That's an improvement!

[Watermom]

Use a little muriatic acid to lower your pH some. Add about a pint slowly in front of a return jet -- gloves, glasses, stay upwind of fumes, pour very close to the water to avoid splashing. After a few hours, retest pH and repeat til you get below 7.8.

You need to shock your pool back up to 15. Also, run the pump 24/7 to let the filter trap the dead algae. Test your cl in the evening after sundown and then again in the morning within 2 hours of sunup and see if you are losing more than 1ppm of cl overnight. If not, your algae is dead and now it is time to be patient and let the filter do its job. (Don't test your pH when the chlorine is high, however, or you'll get a false high reading.)

You might try adding a little DE to your filter. Many of us with sand filters do this to help it filter a little better. More about that here:

http://www.poolforum.com/pf2/showthread.php?t=3742

[jstkiddn]

Use a little muriatic acid to lower your pH some. Add about a pint slowly in front of a return jet -- gloves, glasses, stay upwind of fumes, pour very close to the water to avoid splashing. After a few hours, retest pH and repeat til you get below 7.8.

You need to shock your pool back up to 15. Also, run the pump 24/7 to let the filter trap the dead algae. Test your cl in the evening after sundown and then again in the morning within 2 hours of sunup and see if you are losing more than 1ppm of cl overnight. If not, your algae is dead and now it is time to be patient and let the filter do its job. (Don't test your pH when the chlorine is high, however, or you'll get a false high reading.)

Thanks! Just added the muratic acid and will retest in a bit.

I need some clarification on shocking the pool back up to 15. First off.....15 as in fifteen? Or 15 as in one point five? I bought some generic household bleach yesterday (6.x%). I had specifically asked Foxx pools several years ago if I could use bleach in vinyl pool and she said an emphatic "No!". I have a feeling that she was wrong. But before using, I just wanted to check to be sure. I can use in vinyl, right?

If so, how much bleach does one put in to raise the levels? I need someone to explain this to me like I'm six. With the salt generator, we usually don't have to shock and when we do I'll admit its usually involved hubby going out there and throwing in some shock willy-nilly. I would like to be pointed to some specifics.

Thanks again! You guys are very helpful!

[aylad]

You absolutely can use bleach in a vinyl pool!! Pool store "liquid chlorine" is 12% sodium hypochlorite. Plain, generic ultra bleach is 6% sodium hypochlorite. Same stuff, just a lower concentration. Haven't met a pool store person yet that can tell me why it's okay to put 12% bleach in a vinyl pool, but not 6%!!! My pool is IG vinyl liner, and bleach is basically the only chlorine source it ever sees, so I can tell you from experience that it's okay.

Anyway, in a 30K gallon pool, each 2.5 gallons of 6% bleach will raise your chlorine by 5 ppm. And when Watermom said 15 ppm, she meant 15, no decimal points! After you get to the initial 15 ppm, then each 1/2 gallon you add will raise your chlorine by 1 ppm, so you can use that as a guide if you find that you're losing chlorine overnight and need to maintain that shock level a little longer.

Janet

[jstkiddn]

Just wanted to update:

I've been super busy this week and really haven't done a lot of other things to the pool besides brush the walls and vacuum a couple of times. I did add DE to the filter. Let it run over 24 hours right after adding and since have run it at least 12 hours a day. After adding the DE, the difference overnight was AMAZING!! Still have some stuff that needs vacuuming but I think I've about got it licked. I have NOT added any chlorine or bleach. There were just a couple of green spots on the walls I brushed off today, but I think they were leftover from before. The water was so yucky for a while, it was hard to see where I was brushing. Wondering if I should shock again or just leave well enough alone?

I received my Taylor test kit this week and finally had time to use it today. Hopefully I did everything correctly, so here are the results:

Free Chlorine - 2.4 ppm ?? This one was kinda tricky. Used a 25 mL sample Turned pink with 2 dippers. 12 drops to colorless x .02 = 2.4 Right? On step 5 there was NO pink...so no combined chlorine? Right? Whatever THAT is. Since didn't turn pink, I didn't do steps 6 or 7. Is it supposed to have combine chlorine?
Ph - 7.6 or 7.8 (think I'm color blind when it comes to pinks. I have a hard time with this one)
Alk - 100 ppm
Hardness - 100 ppm
CYA - 40 ppm

The water is finally clearing up. I attribute most of this to adding the DE to the filter.

Thanks for reading and hopefully someone will tell me my next step.

BTW - One more question. If I do need to shock by adding bleach, do I add to skimmer or just pour into pool?

Sorry to be so dense, but I just want to make sure I do this correctly. Thanks!!!

[Watermom]

You are doing the tests correctly. But, with a CYA of 40, your chlorine level should never go lower than 3ppm. Keep it between 3-6 all the time. That may be why you still see green. I would suggest shocking the pool up to 15 and see if that takes care of the algae for good. If you can go from sundown one evening to sunup the next morning without losing more than 1ppm and you still have no CC, then you are OK and can let the cl drift down to 3-6. You can either add the bleach slowly into the skimmer or slowly in front of a return jet. All other levels look fine.

BTW -- Use the 10ml sample instead of the 25ml sample to make your reagents last longer. Having readings within 0.5ppm accuracy is plenty.