+ Reply to Thread
Results 1 to 10 of 84

Thread: Time to replace sand?

Hybrid View

  1. #1
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: Time to replace sand?

    POPP! Pool Owner Patience and Persistance!

    Carl
    Carl

  2. #2
    jonno is offline Subscriber Thread Analyst jonno 0
    Join Date
    Jun 2011
    Location
    Brookeville, MD
    Posts
    54

    Default Re: Time to replace sand?

    Evening numbers:
    FC 0.0
    CC 2.0
    pH 7.3
    TA 180
    Headed out to get more acid to keep the pH at 7.0, but glad to see that the CC finally is in the 1 - 2 range. Thanks for the reminder about POPP Carl.
    Taylor K-2006, IG Vinyl 26,000g, Sand filter 275 lbs, 3/4 HP Hayward Super Pump II, CYA over 100, Using 12.5% bleach

    18'x36' rectangle 26K gal IG pool; Liquid Chlorine 12.5% ; Sand Filter 275 lbs. sand filter; Hayward Super Pump II 3/4 HP pump; 23 hrshrs; Taylor K-2006; delivered via truck; summer: ; winter: ; iPad; PF:4.6

  3. #3
    jonno is offline Subscriber Thread Analyst jonno 0
    Join Date
    Jun 2011
    Location
    Brookeville, MD
    Posts
    54

    Default Re: Time to replace sand?

    On 6/17 Janet wrote:
    "So..his (Ben's) recommendation was to break it (the ammonia) down slowly with the lower doses of bleach, until you start getting CC readings of 1 or 2--at which time you can up the doseage and go ahead and get rid of it. So...stick with the 6 gallon dose for now."

    This is the 2nd day that my CC was 2 or lower. Is it time to up the dosage of bleach?

    Here're this evening's numbers:
    FC 0.0
    CC between 1.5 and 2.0
    pH 7.4 (put in 30 oz dry acid)
    TA 190

    Thanks!
    Taylor K-2006, IG Vinyl 26,000g, Sand filter 275 lbs, 3/4 HP Hayward Super Pump II, CYA over 100, Using 12.5% bleach

    18'x36' rectangle 26K gal IG pool; Liquid Chlorine 12.5% ; Sand Filter 275 lbs. sand filter; Hayward Super Pump II 3/4 HP pump; 23 hrshrs; Taylor K-2006; delivered via truck; summer: ; winter: ; iPad; PF:4.6

  4. #4
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Time to replace sand?

    If you want to go to a 9 gallon dose, that would be OK.

    If you can, use muriatic instead of dry acid. It's cheaper, stronger, and better for your pool. Of course it's more noxious to handle -- gloves, glasses & watch the fumes when you pour! But you're going to need to lower your alkalinity, so keep pushing the pH back down.

  5. #5
    jonno is offline Subscriber Thread Analyst jonno 0
    Join Date
    Jun 2011
    Location
    Brookeville, MD
    Posts
    54

    Default Re: Time to replace sand?

    Thanks Ben - I'll up the dose to 9 gallons starting with this evening's dose.
    FC 2.5 (first time I've seen FC in a while)
    CC 2.0
    pH 7.3 I switched back to muriatic acid this morning.
    TA 190-200
    Taylor K-2006, IG Vinyl 26,000g, Sand filter 275 lbs, 3/4 HP Hayward Super Pump II, CYA over 100, Using 12.5% bleach

    18'x36' rectangle 26K gal IG pool; Liquid Chlorine 12.5% ; Sand Filter 275 lbs. sand filter; Hayward Super Pump II 3/4 HP pump; 23 hrshrs; Taylor K-2006; delivered via truck; summer: ; winter: ; iPad; PF:4.6

  6. #6
    jonno is offline Subscriber Thread Analyst jonno 0
    Join Date
    Jun 2011
    Location
    Brookeville, MD
    Posts
    54

    Default Re: Time to replace sand?

    Evening numbers:
    FC 0.5
    CC 1.5
    pH 7.2 (put in more m. acid)
    TA 180

    Tonight the dosage increased to 9 gallons of 6% bleach - water is quite green, visibility about 20"
    Ordered a couple 5 gal carboys from Uline and found a local cleaning supply that sells 12.5% bleach for $2.75/gal. so I can keep up the dosage until the water clears - it will seem like alchemy when it does!
    Taylor K-2006, IG Vinyl 26,000g, Sand filter 275 lbs, 3/4 HP Hayward Super Pump II, CYA over 100, Using 12.5% bleach

    18'x36' rectangle 26K gal IG pool; Liquid Chlorine 12.5% ; Sand Filter 275 lbs. sand filter; Hayward Super Pump II 3/4 HP pump; 23 hrshrs; Taylor K-2006; delivered via truck; summer: ; winter: ; iPad; PF:4.6

  7. #7
    jonno is offline Subscriber Thread Analyst jonno 0
    Join Date
    Jun 2011
    Location
    Brookeville, MD
    Posts
    54

    Default Re: Time to replace sand?

    Morning report:
    FC 10.5
    CC 2.5
    pH 7.2 (added more acid)
    TA 190
    Water still green with low visibility.
    Taylor K-2006, IG Vinyl 26,000g, Sand filter 275 lbs, 3/4 HP Hayward Super Pump II, CYA over 100, Using 12.5% bleach

    18'x36' rectangle 26K gal IG pool; Liquid Chlorine 12.5% ; Sand Filter 275 lbs. sand filter; Hayward Super Pump II 3/4 HP pump; 23 hrshrs; Taylor K-2006; delivered via truck; summer: ; winter: ; iPad; PF:4.6

+ Reply to Thread

Similar Threads

  1. Time to replace the cell?
    By semenzato in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 2
    Last Post: 07-24-2011, 02:26 AM
  2. How often shoud I replace sand in sand filter?
    By mikef in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 07-18-2011, 10:41 PM
  3. Time to replace the QuikChlor...
    By steveinaz in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 2
    Last Post: 06-20-2011, 10:44 AM
  4. Time to replace my liner?
    By mdenegre in forum In-Ground Pool Construction and Repair
    Replies: 4
    Last Post: 11-14-2010, 09:39 AM
  5. Time to replace the Dolphin Dynamic
    By beantown in forum Pool Cleaning: Manual or Automatic
    Replies: 10
    Last Post: 09-09-2010, 08:28 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts