This morning - Used my test kit K-2005 and once again very little chlorine

Free Chlorine = 1.0
Total Chlorine = 1.0
Combined Ch = 0

Based on the Best Guess Chart I should aim for at least a 5 correct?

So - my SWCG was set at 70% I took a sample right from the outlet and there was no difference in the readings


BTW - the documentation for my Jandy AquaPure recommends: FC 1-3, CC 0, CYA 50-75, pH 7.2-7.8, Alk 80-120


I also pulled out the 2 gallons of pool water and added 1/4 tsp of bleach and yes it read over 5 (I am letting it sit in the bucket to retest - is this what I should do?)

Next, I set my SWCG to Boost and tested from the outlet again and got a reading of at least 5


I added a gallon of bleach

What do you think?