Sean,

I understand the position, and I hope you are right. But I'm still going to put the anodes on the Marlow pump I have.

BTW, when there's more time, I'll be interested in your reactions to what I'm doing and experiencing. Currently, I've got a 200,000 gallon pool on salt with HEAVY (>400 ppl/day) loads that are being carried by two IC60's and about 25# of cal hypo over 10 days. Levels are holding at 10 - 15 ppm FC with ~120 ppm CYA. (I'm going to take the 4 points off on the inspection. I don't expect much grief; the inspector asked my last year if I would consult with some of the motel pools in the area that were using salt with disastrous results.) Any how, I'll be adding two more IC60's by weeks end, and have the capability to add 1 more beyond that. But with 2 units holding at 80% duty cycle, I think 4 units at 60% are likely to be more than enough.

PS. pH has been DROPPING!