CarlD
I wasn't insinuating that TFP had recommended anything. They are just way too technical with all their chemistry degrees. Over my head. Things seemed to be explained simpler here. There are two sets of numbers because the first set is a 6 way test strip and the second is the drop kit from WM with the two wells for the yellow and red drops. I am aware they are not the most accurate but they are what I have. I live in a rural area and don't have a good source of supplies and I don't have a trailer to take to the store to buy tons of gallons and boxes of stuff. I will have to order most stuff and it will take at least a few days to get here and I know I need to do something quickly to prevent damage. I did figure that much out

Ben
Am I going to have to buy M something acid to compensate for the Borax or just start dumping

6 way test strip
TH-total hardness
TC-total chlorine
FC/B-free chlorine/bromine
PH-ph
TA-total alkalinity
ST-stabilizer (I think this would also be CYA right?)

Drop Kit - Sorry, got those backwards
Chlorine/Bromine-5.0 but it is a little brighter yellow than the scale shows
PH-a shade in between the 7.2 and 7.6 reading

I have no idea how to change out any of the pump stuff.
Model # PK1200-6