Re: Putting up pool, need all the advice I can get!
Thank-you! My pool looks pretty good right now as I am getting the levels regulated using the TF-100 kit. One thing I am a little confused about is the chlorine level I should be keeping. The manual for my swg says to keep the FC between .4-1.5ppm. However it seems what I a have been reading on this forum I should be having the chlorine up closer to 2-3ppm? My manual also suggests cya to be 30-50ppm but again the forum suggests it to be higher around 70-80ppm. Also the T/A recommendation is 100-140ppm but the forum suggests it to be 70-90ppm. So, should I just keep my readings strictly to the manual of my swg or by the recommendations here on the forum?
Here are today's readings:
Temp: 58
FC: .5
CC: .5
TC: 1
PH: 7.2
T/A: 80
CYA: 30 (which should be increasing as I did add more CYA via sock method)
Borates: 15
copper: .1
It has been cloudy and raining alot the last few days too, how will that affect my readings?
Thank you!!!!
Vickeybear
I have an Intex metal frame rectangle pool, 9700 gallons. 12x24x52".
Krystal Clear Saltwater System Model CS8110
Krystal Clear Sand filter pump 14" model SF15110
Bookmarks