PoolDoc, thank you for your encouragement.

I will try to rephrase your suggestions the way I understand them, please correct me if I'm wrong or confused or both :-)

Phase 1: Adjusting pH with Borax to steer the process of ammonia destruction and take advantage of its byproducts.
1.1. Goal: Increase pH to 7.6
1.2. How much: Add borax 2 boxes
1.3. How often: 2-4 hours between additions until the goal is reached.
1.3 When and what to test: Test for pH in about 2 hrs after each borax addition.
1.4 Tips: Add borax slowly via skimmer WITH basket in place to avoid clumping and freezing in the pipe.

Phase 2: Brute force evening chlorine addition to get rid of ammonia and other organic compounds.
2.1. Goal: Have a morning reading FC >= 3*CC
2.2. How much: Add 4 gallons of 6% bleach
2.3. How often/when: Every 24 hrs in the late afternoon/evening (no direct sunlight) until goal is reached.
2.3 When and what to test: Test for FC and CC next morning.

Phase 3: Taking care of CYA, TA, etc.
3.*. TBD

Questions:
In 1.3 - is 2 hrs OK?
In 2.2 - is 4 gallons OK? It is a little less than 10ppm.
So essentially in phase 2 I will add chlorine only once a day (evening) and test once a day (morning)?

Thank you again, I am getting over my disappointment with the test results. It is what it is (says my real estate agent).

Vlad