Conflicting test results...........

I tested my water today and the Taylor K-2006 gave me a reading of 6.2 for FC free chlorine.
I have an old cheapie 5 bottle test kit and also a new 5 bottle kit that i use on a regular basis.
The old kit gives me a reading of about 4 and no way a 5 reading which is their max reading.
the new kit gives me the same results, barely a 4, and no way a 5.
So I'm not believing the K-2006 kit. The 2 scoops of powder I use level scoops, and I tried that test a few times and got the same 31 to 32 drops which x .2 gives me the 6.2

The Taylor test reagents are the most accurate test chemicals on the market. The FC test is based on a drop-wise titration endpoint as opposed to others that use simple colorimetric matching. The color matching tests are much more error prone. The OTO ( yellow) test I have doesn't differentiate colors very well above 3ppm and only goes deep orange when my FC is above 8ppm. Taylor drops tell me my FC exactly to within 0.2ppm.

Long story short - toss out the cheapo test kits and use the Taylor results as authoritative.

Use a 10mL sample instead of a 25mL one with the K2006 and it will save on your testing reagents. You will multiply the drop count by 0.5 instead of 0.2. Also, if one scoop of powder turns the sample pink, no need to put in the second one.

Frankly, the only OTO/pHenol kit I trust is Taylor one, but the K-2006 FAS-DPD test for Free Chlorine and Combined Chloramines is the gold standard. It is simply the most accurate and reliable test a home-owner can buy.

If the K-2006 is the gold standard, then why do they not specify that the scoop of powder should be flat)level) or heaping? Or does it not matter?

It does not matter. The powder is simply the indicator dye that you are saturating the solution with to bind to the FC and cause the pink color change. The titrating reagent is the exact solution that then neutralizes the FC and turns the solution from pink to clear. So the only thing that matters is having a known titrating reagent concentration to set the ppm/drops value.

If you look at the scoop handle, it is printed with 0.05gm. So two level scoops adds approximately 0.1gm of DPD powder which is more than enough to react with all of the FC in your test sample.

We usually say that if 1/2 scoop turns the water pink, then that's enough.

Quote:

---

Originally Posted by FormerBromineUser

We usually say that if 1/2 scoop turns the water pink, then that's enough.

---

Some time ago I read that one scoop was sufficient if it turned the sample pink. Out of curiosity I compared using one scoop vs two (as recommended in the Taylor instructions); both turned the sample pink and both resulted in the same FC measurement. :)

Yup. That's what we have been telling you all for years.

Quote:

---

Originally Posted by FormerBromineUser

We usually say that if 1/2 scoop turns the water pink, then that's enough.

---

The main reason to use one level scoop for a 10 ml sample and a heaping scoop or possibly two level scoops for a 25 ml sample is to have a stronger color transition at the end of the titration. With too few scoops, you may undercount but probably by only one drop which is usually not a big deal.

Quote:

---

Originally Posted by pmaru77

So I'm not believing the K-2006 kit.

---

So, haven't heard from you. Are you sticking with the OTO or trusting your 2006?