+ Reply to Thread
Results 1 to 7 of 7

Thread: What is the best temperature to install new liner

  1. #1
    Join Date
    Apr 2006
    Posts
    3

    Default What is the best temperature to install new liner

    Hi, I just found this forum. My wife and I just installed a new wall on our 15X30 AG pool. We also went with a J-hook liner vs. the overlap liner that was originally installed. The liner doesn't seem to fit, but it is the right size. We were able to hang it only on about 9/10th of the wall. Does temperature and sun play a big role in installation? We tried stretching it some, but the outside temperature was only in the 40's with no sun. Today should be middle 50's with plently of sun. I was under the impression that a J- hook liner didn't need to be stretched that much. Are there any tips to installing a J-hook liner? Any info would be appreciated, thanks!

  2. #2
    duraleigh Guest

    Default

    Others who do it for a living will have better advice. That said, I was told when I did mine that 70-80 was an ideal temp. Not too hot to sag but hot enough to give the stretch and flex you need.

    I followed that advice and it worked well for me.

    Dave S.

  3. #3
    kaybinster Guest

    Default

    I had a section come out on my IG pool when I opened it a few weeks ago. The temperature was quite cold so I just used a hair dryers to carefully heat the liner so I could stretch it and get it back in the track.

  4. #4
    Join Date
    Apr 2006
    Posts
    3

    Default

    Thanks for the replies. We did get the liner to fit. The sun made a big difference. Filling it with warm water now to work the wrinkles out. Thanks again

  5. #5
    NWMNMom is offline Registered+ Widget Weaver NWMNMom 0
    Join Date
    Nov 2004
    Location
    WAAAY NW Minnesota
    Posts
    461

    Default Re: What is the best temperature to install new liner

    How warm was it when you got it to work well? Once it was warmer and it went in, was the J-hook a nice fit? Our new pool has a j hook too but will be installed in May after site prep. Thanks.

  6. #6
    Join Date
    Apr 2006
    Posts
    3

    Default Re: What is the best temperature to install new liner

    Quote Originally Posted by NWMNMom
    How warm was it when you got it to work well? Once it was warmer and it went in, was the J-hook a nice fit? Our new pool has a j hook too but will be installed in May after site prep. Thanks.
    It went up to 60 that day, I'm sure your install will go fine. The thing that made the biggest difference was the sun. The whole install was easier that I expected. Good Luck!

  7. #7
    Join Date
    Apr 2006
    Location
    Apache Junction, Az
    Age
    69
    Posts
    475

    Default Re: What is the best temperature to install new liner

    Yes, direct sunlight is the big factor, not the temp so much. High noon on a sunny day is ideal.

    Dennis
    AG pool installer
    Arizona

+ Reply to Thread

Similar Threads

  1. Replies: 3
    Last Post: 12-15-2012, 11:44 AM
  2. liner install help?
    By jazzbone in forum Above-Ground Pool Construction & Repair
    Replies: 3
    Last Post: 05-16-2010, 06:55 PM
  3. Liner Install
    By mohawk in forum Above-Ground Pool Construction & Repair
    Replies: 8
    Last Post: 06-13-2009, 11:27 PM
  4. AG Liner Install
    By snapperbig in forum Above-Ground Pool Construction & Repair
    Replies: 6
    Last Post: 05-18-2007, 01:50 PM
  5. Replacement Liner Install
    By chazzilla in forum Above-Ground Pool Construction & Repair
    Replies: 5
    Last Post: 04-28-2006, 06:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts