Results 1 to 8 of 8

Thread: A number of questions

Threaded View

  1. #8
    Join Date
    Dec 1969
    Location
    Ontario.
    Posts
    272

    Default Re: A number of questions

    Duraleigh, my filter returns clean water, the only exception being when I had to vacumm a lot of the fine powdery dead algae that resulted from cleaning up from a major algae situation that came up while I was away. There was a lot of it and some did recirculate if I was on filter. I wouldn't want the poster to his the panic button because of an extraordinary situation of a very heavy load of very fine particles. If that happens in the normal course of operations there is a problem. Love to hear from others too if they think I may have a problem if this is happening.

    The advice that has been given on this forum for the few years I have followed it is to vacumm the heavy dead algae to waste, and it works.

    Buckeye, that will be good for now. Ride it out until the water clears. I went through this a few weeks ago and as I said, found vacumming to waste helped a lot.
    Last edited by Spensar; 08-21-2006 at 09:53 AM.

Similar Threads

  1. What is the best HOCL (as ppm CL2) number to aim for
    By smallpooldad in forum The China Shop
    Replies: 12
    Last Post: 06-25-2008, 12:06 AM
  2. 2 Speed Relay Part Number
    By RochesterMark in forum Pool Equipment & Operations
    Replies: 0
    Last Post: 09-26-2006, 07:21 AM
  3. alk what is a good number
    By sisie5 in forum Dealing with Alkalinity and Calcium
    Replies: 5
    Last Post: 08-22-2006, 09:44 PM
  4. Number of pool returns/inlets
    By eljefe281 in forum In-Ground Pool Construction and Repair
    Replies: 7
    Last Post: 06-13-2006, 07:38 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts