+ Reply to Thread
Results 1 to 10 of 12

Thread: pool got cloudy after adding pH UP

Hybrid View

  1. #1
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: pool got cloudy after adding pH UP

    Filtration . . . and time.

    You could see if it will settle:
    1. Raise the chlorine level HIGH.
    2. Turn your pump off for 24+ hours.
    3. After it settles (if it settles), adjust your returns upward so they don't disturb the floor.
    4. Carefully vacuum the calcium dust to "WASTE".

    (Not an option, if you don't have a multiport with a 'waste' position.)

  2. #2
    Join Date
    Jun 2014
    Location
    Ontario
    Posts
    5

    Default Re: pool got cloudy after adding pH UP

    Quote Originally Posted by PoolDoc View Post
    Filtration . . . and time.

    You could see if it will settle:
    1. Raise the chlorine level HIGH.
    2. Turn your pump off for 24+ hours.
    3. After it settles (if it settles), adjust your returns upward so they don't disturb the floor.
    4. Carefully vacuum the calcium dust to "WASTE".

    (Not an option, if you don't have a multiport with a 'waste' position.)
    I did a backwash today, and the beackwash looked milky: that means the filter is catching some of the stuff. I'll try some more filtration for now, and if it doesn't improve in 24 hours, I'll do the chlorination/settling/vacuum to waste (yes, I can do that) thing.

    You guys are really helpful: thanks a lot!

  3. #3
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: pool got cloudy after adding pH UP

    You might read http://pool9.net/de-test/

    The page describes adding DE to your sand filter, to verify that it is working properly. BUT, DE will also cause a sand filter to capture smaller particles than it otherwise would do, so using DE might reduce the time it takes to clear the water. However, it will result in more frequent backwashing, and you'll need to replace the DE each time. For most residential sand filters, 1 - 2 cups of DE is enough.

  4. #4
    Join Date
    Jun 2014
    Location
    Ontario
    Posts
    5

    Default Re: pool got cloudy after adding pH UP

    Stupid question: what's DE?

  5. #5
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: pool got cloudy after adding pH UP

    DE (diatomaceous earth)is a white powder that is the filter media for a DE filter. It is actually the ground up fossilized remains of tiny aquatic organisms called diatoms. You can buy it at a pool store. Just buy a very small bag and don't let them talk you into buying a bunch of other stuff while you are there! They'll probably try!

  6. #6
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: pool got cloudy after adding pH UP

    not a stupid question; there's a lot to learn about pools:

    http://www.homedepot.com/p/Pool-Time...2PTM/100071664

+ Reply to Thread

Similar Threads

  1. Water Foaming and Cloudy after Adding Bottle of ALgaecide
    By Bfloboyintx in forum Pool Chemicals & Pool Water Problems
    Replies: 0
    Last Post: 08-19-2013, 09:31 AM
  2. Cloudy salt water pool after adding baking soda
    By justinsmom719 in forum Dealing with Alkalinity and Calcium
    Replies: 10
    Last Post: 07-20-2013, 08:03 AM
  3. Using Soft Swim. Cloudy water after adding flocculant.
    By JvilleKC in forum Chlorine Alternatives: UV, Ozone, Baquacil (PHMB), etc
    Replies: 12
    Last Post: 07-07-2012, 05:29 PM
  4. My Pool Water Turned Cloudy After Adding Bleach
    By Wraypau in forum Using Chlorine and Chlorinating Chemicals
    Replies: 15
    Last Post: 05-19-2012, 10:43 PM
  5. Adding a IG spa to an IG pool
    By noworries in forum In-Ground Pool Construction and Repair
    Replies: 2
    Last Post: 07-17-2006, 03:41 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts