I have a Pentair WhisperFlo 1 1/2 HP Model : WF-6 Pump.
I noticed today when my pump turns on it spits
water out between the strainer basket and the motor
(where it bolts together). I thought I was seeing
things so I turned off the pump and then turn it back
on and sure enough it did it again. I also did notice
a some air bubbles through the clear lid when it
turned on. After a few seconds the air bubbles went
away. Has anyone herd of this ?

Also I have some hairline cracks on the cantilever at
every area where there is an expansion joint on the
deck. Is this normal? I just don't want the cracks to
get larger.

Thanks
John