Results 1 to 2 of 2

Thread: Replacing Spider Gasket

Threaded View

  1. 04-14-2006 10:24 PM #1
    let_her_flicker
    let_her_flicker is offline Registered+ Thread Analyst let_her_flicker 0
    Join Date
    Dec 1969
    Location
    .
    Posts
    63

    Default Replacing Spider Gasket

    Have a Sand Dollar SD-40 Sand Filter with Multi-Port valve. Saw some minor leakage last season around the base of the valve. Plan on replacing this year. I remember reading prior posts that super glue is used to keep gasket in place. Just want to check on the procedures.

    Loosen the bolts. Pull valve assembly out and the gasket should be there. Remove old gasket and scrape away any pieces left behind. Replace with new gasket (super glue in place with very small amounts so gasket doesn't move) and then tighten bolts. Is there a certain pattern to follow when tightening? Thanks
    Last edited by let_her_flicker; 04-15-2006 at 09:52 AM.
    Reply With Quote Reply With Quote
« Need Tall Solar Cover Reel | Adjustable returnline inlets »

Similar Threads

  1. Question about replacing spider gasket on multi-port ?
    By zooba72 in forum Pool Equipment & Operations
    Replies: 0
    Last Post: 05-11-2013, 12:48 AM
  2. Need a Hayward spider gasket
    By Bkirrane in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 05-28-2012, 09:30 AM
  3. Spider Gasket
    By markphin in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 05-21-2012, 12:18 PM
  4. Hayward spider gasket...uh missing?
    By scarywoody in forum Pool Equipment & Operations
    Replies: 10
    Last Post: 06-07-2007, 12:03 PM
  5. Spider Gasket - First Obsticle
    By Sprint54 in forum In-Ground Pool Construction and Repair
    Replies: 9
    Last Post: 05-15-2006, 09:31 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules