My chlorine level is coming back at less than 0.5 ppm. The sample is pretty much clear after adding the OTO. And when using the Taylor kit with the DPD powder.. Does not turn pink.
When I test the cyanuric acid it comes out to about 90-100. I just ran out of the cyanuric acid for testing, ordering more.
The pool is clear, so far, but seeing some pink build up along the sides. Very little
I want to catch this before it is out of control.
Ph = 7.2. Alk = 60
Is a AG 33 x 15 pool
Should I shock?? Just worried about cysniric going higher.
Using HTH pucks
Any suggestions
Thanks
Barry