Stuck Back Wash Valve
My Backwash valve has been getting harder and harder to pull up (It's the kind you twist to unlock and then pull up to select backwash mode) so i bought some new o rings and want to replace and lube them. Well, I can't get the valve to come out. It will pull up to the same point as the backwash selection but not any further with all the screws removed.
I tried a little dawn dish soap but that did not help at all.
Any advise?
14'x31' kidney 21K gal IG plaster pool; SWCG (Saline Generating System's SGS Breeze); Pentair FNS Plus 48 DE DE filter; Whisperflow 1 HP pump; 8 hours hrs; kit purchased from Ben; utility water; summer: none; winter: none; PF:5.7
Bookmarks