Just recieved my new kit which includes all the important test, so I was able to do the whole spread:

FC= 2.4ppm
CC= 0.0ppm
TA= 110ppm
CYA= 45ppm
CH= 150ppm

Now everything seems spot on except that last one. I have a gunnite pool with stone aggregate finish (not plaster). To get it to 200ppm, according to Bleachcalc, I would need to add 9 lbs. of calcium chloride. Should I do it? Another question, if I were to add it, does calcium ever leave water or is it in their permanently like CYA?