Lowering TA.
Hello all,
I recently followed all reccomendations on here for tweaking an SWGC pool. Everything looks great overall. The only issue that I keep having is that my TA will not stay at 70 as suggested. I have tried lowering repeatedly by lowering PH from 7.6 to 7.2 (second lowest reading on Taylor k-2006) but TA always comes back up to 80-90 with PH rise. I have been battling this for weeks and I am wondering if I should just leave well enough alone at this point?
Also, we are leaving for vacation for two weeks. What can/should I do to my pool so that I don't have any unwelcome surprises when I get home? I live in SO. FL. where water temps are around 90 right now so I am very hesitant to shock and shut off the pump as I have seen suggested on here. I was thinking Super Chlorinate, decrease pump run time, top off other chemicals, borates, clean cart. and let it ride. Any suggestions? Thanks in advance!!
I live in South Florida. I have owned my first pool for 6 years now. 12,200 gal. with exposed aggregate finish, spa with spill over, cartridge filter, pop up bottom cleaning jets, Chlorine by swg. I am eternally grateful for The Pool Forum!!
15'x30' Rectangle w/ ovals at ends 12.2K gal IG pool; Bleach now as SWCG died.; Hayward 1200 cartridge filter; Emerson 2HP pump; 6hrs; Taylor K-2006 La Motte Borate Test Strips; utility; summer: ; winter: ; iPad; PF:9.8
Bookmarks