Re: Pool Pilot Low Amps Cell 0V 0.6A
What do the center and two outer blades look like compared to the blades between them? Are they all the same length or are the leading edges shorter?
The OV and 0.6 Amps sound like the cell is not getting energized.
What % are you running? Do you see the cell cycling ON and OFF, as per the display on the lower right corner.
How do you have your DIG running? Controlling the main filter pump, connected to an Electronic Control System, or wired to an external time clock?
Put the unit in Boost and let it run for a few minutes before doing the TEST POOL PILOT.
Also, Press the PUMP button and let me know what it reads. It should not read REMOTE RUNS PUMP. If so, you will need to reprogram the unit, as it's looking for a signal from an Electronic Control System.
Sean Assam
Commercial Product Sales Manager - AquaCal AutoPilot Inc. Mobile: 954-325-3859
e-mail: sean@teamhorner.com --- www.autopilot.com - www.aquacal.com
Bookmarks