Hi,

Crazy day. Not sure if I posted my numbers yet.. Here is what I determined from my kit.
I used the 25ml sample to be a bit more accurate.

PH 7.7
TA 40ppm
CH 40 ppm

As far as the chlorine test. Really not sure how to determine the results. Upon adding my first scoop of powder my sample did turn pink. I then added 2 drops of the R-0871 and went to colorless.
FC= 0.4ppm ?
I then added 5 drops of the R-0003 and sample DID NOT turn pink. At this point I was not sure what to do. CC=0 ?

The sample sat there for a min or 2 it took on a very very slight pink hue? Not sure so I decided to proceed. Since it was ever so pink (if you want to call it that) I added 1 drop of R-0871 and then it went back to colorless. Multiplied my 1 drop by the 0.2. CC= 0.2ppm?

TC= 0.4ppm or 0.2ppm not exactly sure!

Would be ever so grateful if someone could look them over. If I am going to be successful with this kit I really need to know what I am doing. The other tests seemed to be fairly straight forward, just the chlorine one was a bit tricky for me.

Thanks again,
Carrie