Re: Adding CYA
Amato sells the reagents and has been a great place for me...
Here's a link to their site:
http://www.amatoind.com/taylor-testi...s-c-30_35.html
For the CYA, put it in a old sock and hang it in front of a return jet and it will slowly dissolve. You can even squeeze on it every once in a while to help it break down. It will take a while to get in the water and show up on a test. I'd add 3/4 of what you think you need and then wait a week or two and test as you can always add more but removing it means a partial drain and refill
Evan S.
AG FastLane Pool, 9x13 ~ 3,000 gal, COVERED/INSULATED 23X7, 30 gpm water pump (runs 12 hrs a day) AND a Hayward Power-Flo LX 1.5 hp Pump (only used on occasion for the pool sweep), Hayward 100K BTU Heater, Waterway Flo-Pro Skim Filter & Slime Bag, no other filters
Bookmarks