+ Reply to Thread
Results 1 to 10 of 16

Thread: Algae...pool store test results

Hybrid View

  1. #1
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: Algae...pool store test results

    Also no reason not to run the solar panels, especially if your water is colder than you like. I'd rather keep water moving through them during the cleaning process. Still, when they are off, if you have a lot of sun, they may well get hot enough to bake any algae to death...They can get hot enough to burn you without circulation.

    Either way, I guess.
    Carl

  2. #2
    SoCalBoo is offline Registered+ Thread Analyst SoCalBoo 0
    Join Date
    Apr 2006
    Location
    San Diego
    Posts
    66

    Default Re: Algae...pool store test results

    so the pump has been on for about 14 hours, 6 of those hours through the solar. I put in the amount of bleach per poolmom's recommendation, and slowly added Ph throughout yesterday afternoon and evening at the return - used almost a gallon. Actually ended up overshooting the Ph a tad, but not too bad - Ph is 7.2 consistently in three areas of the pool and the spa this morning. Ch is at least 15 (I don't have a scientific method to test...my drop test stops at 5ppm, so I just put 1/3 pool water and 2/3 distilled water, and it is registering above the 5ppm sample). Interesting, TA only went down to 110 from 120. For the amount of acid I added, I would have expected a drop of about 25ppm (by my calculations for my size pool, it would take 48 oz to drop it 10ppm. Oh well, 110 is just fine by me.

    I unplugged the trisensor.

    So how long should I keep the cl level at 15ppm?

    When is the pool safe to swim in...is it safe to swim at 15ppm of cl?

    thanks for the help. things are looking better, but the proof will be in the pudding - or, actually, the absense of the mustard colored pudding on the side of my pool!

  3. #3
    SoCalBoo is offline Registered+ Thread Analyst SoCalBoo 0
    Join Date
    Apr 2006
    Location
    San Diego
    Posts
    66

    Default Re: Algae...pool store test results

    (bump)

    After keeping ch level at or about 15 for a number of days, I held off on adding more chlorine yesterday, and the mustard returned. I was brushing at least once a day, ph was good (7.4-7.6). oh well. Ch is still registering about 12/13ppm (I don't have the most accurate method of testing...yet...just bought Ben's kit).

    Figure it is time for poly. bought some poly today, the 60% strength. back of container says 11-17 oz per 10k of pool. I have 22,500g in ground, gunite and plaster. So that's 25-38 oz (container is 32 oz). Should I just put whole thing in there? Any problem with adding poly with pool with ch levels in low teens?

    Thanks for the help. I'll cut and paste this over to the algae forum.

+ Reply to Thread

Similar Threads

  1. Pool Store vs Test Kit Results??
    By hawkeye91 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 15
    Last Post: 07-16-2010, 09:58 AM
  2. Pool Store Test Results
    By LFRoberts5 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 6
    Last Post: 07-19-2007, 04:35 PM
  3. My test results vs. Pool Store...now what??
    By Henrys514 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 6
    Last Post: 06-16-2006, 12:32 AM
  4. Test Results from pool store
    By jrtvols in forum Testing and Adjusting Pool Water Chemistry
    Replies: 1
    Last Post: 05-02-2006, 01:59 PM
  5. pool store test results
    By fullhouse in forum Testing and Adjusting Pool Water Chemistry
    Replies: 7
    Last Post: 05-01-2006, 05:20 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts