Going thru all of salt

[moreyes]

More info would be helpful, we have not had to drain the pool of extra water, no auto water feed. I asked my wife if shee thinks it is loosing water and she said no. Cartridge filter.

It is a 26,000 g pool. New liner 2 years ago(ouch ) She tested the CYA and said it is at zero ppm according to her, she does the chemicals, i do the maintenence.

Yep the salt thing has me baffled, the SWG appears to be in working order, it got cleaned this spring and just recently checked it again. Can they become scaled enough to cause the salt readings to skew?

She also said the other chemicals where ok

[CarlD]

Why don't you post all the levels of all the tests? Sometimes we see something that tells us more. "OK" is pretty vague.

I'm not the expert on SWGs. Waterbear and PoolSean know far more. But I do know that you must run higher CYA levels with SWGs. If CYA is zero, you are going to have troubles. I believe the recommended level is 70-80ppm for CYA.

Have you been losing CYA or just never had any? This is important.

[moreyes]

I will have her get me the results and post em

[waterbear]

OK, you are losing salt and CYA (since I assume you did have the recommended amount in the water). If you do not have an automaitc overflow drain I would start looking for leaks.

[Pool Clown]

What makes you think you are loosing salt? 0 CYA does not mean 0 salt. If you are going by what your unit is saying the salt is, stop, and take a sample to your pool store to get it tested with a meter, not test strips. There is a chance that the unit is giving you the wrong salt reading, thereby telling you you need more salt when actually, you're putting in (way) too much.

[dmanb2b]

Salt test strips (Acucheck) tend to be accurate within +/- 300ppm...it could be the SWG unit, but if CYA is declining, then salt is too. Like salt, CYA does not evaporate. It can vanish (another topic...can convert to ammonia) in the offseason, but if the pool is properly maintained during the swim season CYA comes down with dillution, as does salt.

[Poolsean]

Moreyes, a scaled cell can cause the salt reading to read lower than it actually is. Remove and inspect the cell blades to ensure there is no calcium hardness build up between the blades in the cell.

How are you determining the salinity level?