Re: IN CANADA: Where to buy Taylor Test Kit???
Carrie, if you test with the 10ml sample, you'll use less of your reagents. BUT, by doing so, you'll only be able to test at .5 ppm resolution (.2 is more precise than .5). That being said, .5 is fine IMHO.
PS, when you put the powder in, if it turns pink with one scoop that's all you need to use (save the other scoop for your next test)
Edit: CYA won't be present until you add it, so no need to test until then (read up on that as you don't want to test right away).
Last edited by sturev; 06-30-2010 at 02:26 PM.
Reason: forgot CYA
Evan S.
AG FastLane Pool, 9x13 ~ 3,000 gal, COVERED/INSULATED 23X7, 30 gpm water pump (runs 12 hrs a day) AND a Hayward Power-Flo LX 1.5 hp Pump (only used on occasion for the pool sweep), Hayward 100K BTU Heater, Waterway Flo-Pro Skim Filter & Slime Bag, no other filters
Bookmarks