Hi everyone, I have an above ground 15x24 oval pool, with a Hayward perflex filter DE, & a Hayward Power Flow LX 1.5 hp pump.
I recently installed a Sungrabber solar heater to the pump & the pressure went from between 8-10 psi to 19-20 psi. I cleaned the filter & added new DE, but I still have the same pressure. I was wondering if this is normal or is solar panels too much for my pump to handle? (I wouldnt think so with a 1.5 hp pump)
The solar panels are 2'x20' & I installed 2 of them because that is what the size of my pool called for.
Any advice or recommendations are greatly appreciated..Thanks