+ Reply to Thread
Page 4 of 4 FirstFirst ... 2 3 4
Results 31 to 34 of 34

Thread: Backwashing and shocking

  1. #31
    waterbear's Avatar
    waterbear is offline Lifetime Member Sniggle Mechanic waterbear 4 stars waterbear 4 stars waterbear 4 stars waterbear 4 stars
    Join Date
    Nov 2004
    Location
    St. Augustine, Fl
    Age
    71
    Posts
    3,743

    Default Re: Backwashing and shocking

    You have a K-1005, which you can get directly from Taylor for $39.05 plus shipping. It is ok but for just a bit more money you could have had a much better test kit.

    The TA, CH, and CYA tests are the same as in the K-2006 so they are what you want to have.

    The pH test is not as precise as the one in the K-2005/K-2006 but usable. It is better than most other pH tests, FWIW.

    Be aware that this kit uses pH reagent R-0014 and NOT R-0004 when you need to get a refill. The acid and base demand tests in this kit are not that trustworthy. The K-2005/K-2006 is much better at these tests.

    The chlorine test is a DPD test and your comparator does not have the dilution markings on it that the K-2005 kit has so you would have to do the dilutions in a different container first.

    I would still add a stand alone FAS-DPD test to this kit as Polyvue mentioned in his post above. This will give you the functional equivalent of the K-2006, which is the kit most recommended here and on other forums. The advantage of FAS-DPD testing over DPD testing is that you can test up to 50 ppm FC with a precision of either .5 ppm or .2 ppm. There are no dilutions involved and there is no color matching. It is a drop counting test that turns from pink to colorless and it basically foolproof. It is a bit slower and slightly more expensive per test but its advantages far outweigh its disadvantages. This would have you all set as far as water testing goes!

    Hope this info is helpful.
    Retired pool store and commercial pool maintenance guy.

  2. #32
    Join Date
    Jun 2010
    Location
    Texas, USA
    Posts
    15

    Default Re: Backwashing and shocking

    Thanks Waterbear!
    Your information has been very helpful and informative. I have a much greater respect for my pool.
    I am going to get the FAS-DPD. I'm very interested in just what "precise" looks like.
    Thanks again to everyone.
    Judi
    Judi McRae - Katy, TX
    Doughboy Sand Dollar II 18' x 48" Vinyl liner - ~ 7,000 gal
    Pool Power Pak II pump - Media Master 1600 sand filter

  3. #33
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: Backwashing and shocking

    Joecus ---
    I split this thread and moved your question and Waterbear's reply into a new thread titled: Hot climate = Optional high CYA. Please continue there. Thanks.

  4. #34
    waterbear's Avatar
    waterbear is offline Lifetime Member Sniggle Mechanic waterbear 4 stars waterbear 4 stars waterbear 4 stars waterbear 4 stars
    Join Date
    Nov 2004
    Location
    St. Augustine, Fl
    Age
    71
    Posts
    3,743

    Default Re: Backwashing and shocking

    Quote Originally Posted by Watermom View Post
    Joecus ---
    I split this thread and moved your question and Waterbear's reply into a new thread titled: Hot climate = Optional high CYA. Please continue there. Thanks.
    Thanks!
    Retired pool store and commercial pool maintenance guy.

+ Reply to Thread

Similar Threads

  1. Backwashing question.
    By JenLM in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 06-11-2011, 08:56 AM
  2. Losing sand when backwashing
    By Needzo in forum Pool Equipment & Operations
    Replies: 4
    Last Post: 05-19-2010, 10:43 AM
  3. constant backwashing ?????
    By stma in forum Pool Equipment & Operations
    Replies: 5
    Last Post: 05-28-2008, 05:57 PM
  4. Backwashing questions
    By deanbrew in forum Pool Chemicals & Pool Water Problems
    Replies: 3
    Last Post: 06-25-2007, 04:19 PM
  5. skimmer socks & backwashing
    By Donna's Poolboy in forum Pool Equipment & Operations
    Replies: 14
    Last Post: 07-11-2006, 11:36 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts