How Often Backwash?

[ThaSatelliteGuy]

Well then the pump maybe my problem because when the pressure rises from 6 to 10-11, my flow drops to nearly nothing..skimmer not skimming, robot not robotting. Also, because it's Intex, I had plumbing issues. So, if pressures need to be higher, I'll need to upgrade a couple rubber couplings to the metal-covered rubber couplings, cuz I dont believe the ones I have will hold as they are already swelling from the pressure at 10psi. It's really sad that Intex feels the need to stick it to us like that with their fittings.

[Poconos]

Something else that could cause low pressure is a suction side restriction but not in your case. It sounds like you're doing everything right. Upping the pump size just to get higher pressure isn't what you want to do. Your pressure is climbing almost 100% which means dirt is being caught. If you up the pump size ypu'll just ram dirt through the filter.

Some things to try. If your multiport valve has a 'closed' position on it, set it there and fire the pump up momentarily to see what the blocked flow pressure is. Also this will pressure test your questionable couplings. That will give you an idea how close the 11 psi is to the limit. Maybe that's normal for an Intex pump. I have no idea.

Another thing to try is to put something on the end of your backwash hose or pipe to catch what comes out. Maybe a skimmer sock or even just a sweatsock. That will give us another bit of info.

Keep at it, you'll figure it out. There is always an explanation.
Al

[CarlD]

I'm still concerned about the sand. Normally, with a 200# filter you get 4 50# bags of filter sand and just use that. You MAY consider doing a replacement as 50# bags are about $5-$6 usually so that's maybe $25.

Then again, has the pollen falling off eased the frequency of backwashing at all?

[ThaSatelliteGuy]

Ok multiport valve "closed" I got 11 - 12 psi. So that's all the psi the intex has got. So in reality, Ive got 6psi clean, and 10-11 psi when i need to backwash. So my pressure climbs almost 100% and when I backwash, it does turn grey then clear about 2 min later.

In the end, if I have to backwash once a day, it still beats the heck outta washing those cartridges once or twice a day, and except for the water and salt, no cost. My pool is SO CRAZY CLEAR now compared to before, that 2min a day backwashing I think I can live with.

As for the sand, it is pool filter sand. The only question is how much as the bags said .5cuft instead of weight. I use 50lb bags of concrete(not 80) everyday. These bags of sand were not that heavy...garaunteed. But I have a mud hole next to my equipment, that I need sand for. I will buy a couple of these bags for that purpose and weigh them for GP to see how much sand is in the filter, but from my estimate of weight of bags, and how much I got on the ground, I'm betting almost a perfect 200#. I'd say give or take no more than 15# either way.

Oh and the pollen... I changed to sand filter after the pollen fell off already so I have no comparison.

[Watermom]

Just a little info for you. If you post and then two minutes later think of something you forgot to write, you can edit your post instead of writing a new one. Just click on the blue EDIT button in the lower right-hand corner of your post.

[Poconos]

Sat Guy,
I merged your two posts. You may be limited to the number of posts so this gives ya one more. We're still not sure how the various user groups are structured yet.

On your pressure. since you now know the pump limit I'd give a couple psi margin to backwash. Probably about 9 psi. The grey color says you're catching something and eventually you should get it all.

Enjoy your pool.
Al
PS: curious about your username.

[ThaSatelliteGuy]

Ya I knew about the Edit button, but cant hit a edit button on a post thats not approved and showing yet :-) Didnt know about a post count limit... Why? Arent new users the ones with all the questions??

And my UN... I am 32 been installing satellite for 7yrs now, and back in the day, was able to hack anything you could hook up a tv to, so among all my friends, especially the younger ones, I was "the tv guy" or "the satellite guy".

[Watermom]

Ya I knew about the Edit button, but cant hit a edit button on a post thats not approved and showing yet :-)

Yep. You're right. I hadn't thought about the fact that maybe your post was still in the moderation queue and thus you couldn't yet edit it. We work as fast as we can and try to mod those posts in as quickly as we see them!