I am new to the world of swimming pool maintenence. We just completed the installation of a 24 ft round 54" high above ground pool with a vinyl liner. About 4 inches of well water was added to hold down the liner, the rest came from city water trucked in. We had a couple of good storms yesterday so some of the water is from God above. The pool came with a sand filter with Zeobrite. I did order the Taylor K-2006 test kit so here are my numbers.

7:30 am
pH 7.6
FC 0.5
CC 0.5
TA 330
CYA 0
Calcuim 330 (don't think it matters with vinyl liner anyway)
I added a jug (1.42 Gal) of Clorox regular bleach. BTW, I mixed it with pool water and poured it over the skimmer. Not sure about my method or if it even matters.

12 pm
pH 7.6
FC 4.5
CC 0
TA 350
CYA 0
The water is cloudy and greenish. I'm not quite sure what to start with. The pH is okay but I think if I don't have any CYA my chlorine is going to degrade too quickly. And the Alkalinity is way too high. I just need a nudge in the right direction if anyone is so inclined. Thanks in advance for your help.