Need Help Quickly!!

[94ukgrad]

Pool is now 2/3 full now. I just got finished adding enough bleach to achieve FC of 8.5 and CC=0.5. I also have 2 pounds of CYA hanging from the hose in a sock. I also added 18 oz. of algeacide 60 yesterday morning. My PH is 7.0. Should I add a little of borax or just wait until pool is full and run the filter?

Wish I could get the pump going. I don't like looking at dirty water.

Later,

[Watermom]

As long as you pH stays at 7.0 or higher, you are ok. If that is the case, I would probably just wait until your pump is up and running before adding Borax. But, if it dips below 7.0, add some Borax and stir it around to get it mixed in there.