Quote Originally Posted by cajunfla
Only one minute problem that is probably my fault. I turned the vacuum off while the unit was over the water. some of the grass clippings came out and fell back in the pool. Lesson learned, place over decking before shutting off the unit.
Jeff
Um, check your directions--you don't run it out of the water. The way to do it (and I've been doing it for a couple of years now) is UNDERWATER turn the PB so the nozzle is up and the handgrip is down and THEN turn it off. Lift it out of the water that way and it will drain thru the bag and the back and not out the front. If it's attached to a pole you have to removed from the pole, underwater, and then tip the nozzle up. Be careful not to let that end of the pole hit the bottom of the pool, especially if you have a vinyl liner--it could cut it.