Quote Originally Posted by Poconos View Post

The buggy part of this problem is something appears to have changed. Plumbing usually doesn't change so that leaves the filter and pump. Consider the pump. Check the impeller to make sure nothing is tangled in there. Been many instances where people find stringy things that got past the skimmer and pump baskets. Otherwise nothing should change unless the pump overheated somehow and was deformed, but unlikely since the pressure is 'normal'. So let's consider the filter. Need to know more as I asked above.

Al
Al, as an after thought, I would venture to guess that his filter may be marginal for the pump that is in place. Since a too big filter is excellent compared to a too big pump that causes horrors; that may be yet another issue.

I wish the OP would have posted pool size in gallons, pump size, pipe run lengths etc. It sure helps to diagnose stuff like this.

As for an air lock, you should see it on a hydronic heating system that is not piped properly, but with that and most pipes exposed, it is easy to diagnose.