+ Reply to Thread
Results 1 to 10 of 43

Thread: Help Deciphering My Taylor Test Results

Hybrid View

  1. #1
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

  2. #2
    labdi01 is offline Registered+ Thread Analyst labdi01 0
    Join Date
    May 2010
    Posts
    77

    Default Re: Help Deciphering My Taylor Test Results

    The pool is 24' round AG. So, we're 13.5+K gals.

    This doesn't make sense. What's your initial instinct?

    I put 1/2 gal in on Monday am. We had 6 people in the pool for several hours Monday afternoon. That evening, I put 1.5 gals in. I haven't put any more in since. We had 3 more kids on Tuesday.

    We back washed, added DE and vacuumed to waste this am prior to receiving reagents.

    And then to get a CC chlorine reading tonight? Is it me - or does this sound wonky?
    Dianna
    New owner of 24' above-ground pool, vinyl liner, 1 hp pump and sand filter, added D.E.

  3. #3
    chem geek is offline PF Supporter Whibble Konker chem geek 4 stars chem geek 4 stars chem geek 4 stars chem geek 4 stars
    Join Date
    Nov 2004
    Location
    California
    Age
    66
    Posts
    2,226

    Default Re: Help Deciphering My Taylor Test Results

    Since it sounds like you are using the FAS-DPD chlorine test, I assume that if you are using a 25 ml sample size that you are multiplying the number of drop by 0.2 (or dividing the number of drops by 5) to get the FC reading. If you are using a 10 ml sample size, then you multiply by 0.5 (or divide by 2).

    Since you reported 42.5 it sounds like you are using a 10 ml sample size and it took 83 drops to go from pink to clear, is that right? If so, then that's a high level of chlorine, but one day in sunlight should bring that down to the 20-30 range given your current CYA level. I think that will happen faster than it will take you to get some chlorine neutralizer which would be your other alternative.

  4. #4
    labdi01 is offline Registered+ Thread Analyst labdi01 0
    Join Date
    May 2010
    Posts
    77

    Default Re: Help Deciphering My Taylor Test Results

    Hi Chem Geek

    Thanks for checking in!

    You're correct - I am using the FAS-DPD test system as you described (using the 10 ml mark and dividing by 2).

    The math to get there just doesn't seem to be adding up to me (amt of bleach/bleach strength vs time lapse, etc). That's why I suspected weakened reagent - but don't know the science behind this particular reagent. Again, no mathemagician, like you. D

    Is it safe for my kids to swim in? And how in the WORLD could I have a CC level? P
    Dianna
    New owner of 24' above-ground pool, vinyl liner, 1 hp pump and sand filter, added D.E.

  5. #5
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

  6. #6
    labdi01 is offline Registered+ Thread Analyst labdi01 0
    Join Date
    May 2010
    Posts
    77

    Default Re: Help Deciphering My Taylor Test Results

    K. No one in the pool!

    Tomorrow is going to be sunny and hot! (should I be keeping my filter on 24/7? I have been.

    Don't you know, my daughter is feeling ill after swimming on Monday. Shoot! What did I do?

    She woke up with a headache on Tue and "it hurt to try to GO..." She swam again on Tue and today...Montezuma's revenge AND a headache. Coincidence or should I take her to her pedi?

    No one else that was in the pool appears to be ill. YET.

    Some people shouldn't be allowed to have pools!
    Dianna
    New owner of 24' above-ground pool, vinyl liner, 1 hp pump and sand filter, added D.E.

  7. #7
    chem geek is offline PF Supporter Whibble Konker chem geek 4 stars chem geek 4 stars chem geek 4 stars chem geek 4 stars
    Join Date
    Nov 2004
    Location
    California
    Age
    66
    Posts
    2,226

    Default Re: Help Deciphering My Taylor Test Results

    If you have access to an inexpensive OTO chlorine test, then with the chlorine as high as you seem to be measuring, it will be well past yellow and even orange and probably red. Or, gulp, you can take it to a pool store to be measured, assuming they know about diluting the water to avoid bleaching out any DPD chlorine test they may use.

+ Reply to Thread

Similar Threads

  1. Same Taylor Test Kit K-2005 - (Different Results)
    By wapate in forum Testing and Adjusting Pool Water Chemistry
    Replies: 10
    Last Post: 06-14-2012, 01:49 AM
  2. First Test Results with Taylor Kit
    By sunNfun in forum Dealing with Alkalinity and Calcium
    Replies: 4
    Last Post: 06-19-2011, 10:29 PM
  3. Taylor test kit first results
    By JazzMan2010 in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 7
    Last Post: 06-03-2010, 01:07 PM
  4. Taylor Test Kit Results
    By rfreeman in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 07-02-2006, 05:40 PM
  5. How to interprete Taylor Kit results
    By mphare in forum Testing and Adjusting Pool Water Chemistry
    Replies: 8
    Last Post: 05-31-2006, 09:45 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts