pilot light won't light on pool heater

[packerfan]

hello, i have a teledyne/lars pool heater millivolt control type and my igniter won't fire up the pilot light. i've not had this problem before and yes the gas is on but i don't smell any or hear anything when i push the pilot switch down. any ideas? thanks Randy

[Poconos]

When I had a propane heater I used to have to hold the button in for a long time the first time after winter to bleed air out of the long pipe to the tank and pressure regulator. I used to wedge something to hold it in and walk away for a while. There is so little gas used for the pilot the bleed process is slow. Of course, could be something else too.
Al

[packerfan]

thanks Al, that's exactly what i was thinking so i held the button down on pilot for a long time and still no luck. i can't hear or smell anything coming into the heater. i know the feed /supply line is good because the heater gas line is split off my main where the other end goes to our gas stove which works fine. i don't know what or how to check for the gas, if this is the problem. most problems with pilot lights are keeping them lit once they are lit. i can't even get to this point. regards Randy

[Poconos]

I was also wondering if the pilot light pipe and orfice could be plugged somehow. Any way to take that piece off the gas control valve assembly and check and clean it? Not sure how this is put together so I'm guessing. I believe there is another pressure regulator in the heater and that could be messed up. I guess I'd start taking the gas lines apart wherever possible and try and isolate where the flow stops. Never had to dig into one. Anyone else with ideas?
Al

[Isshin]

I'm with Poconos on this one. The first thing I would try is cleaning out the tube and orifice. This has happened to me twice before and that was the fix - best of all if it works its free.

Other issue might be the pressure switch, you might want to try jumping it and see what you get.

[Poconos]

I'm not 100% sure but I think the pressure switch and all the other interlocks should prevent the main burner from firing but the pilot should still work. I may be wrong though.
Al