Results 1 to 10 of 17

Thread: Cant seem to raise TA or PH

Threaded View

  1. 06-10-2010 07:46 AM #8
    drbob101
    drbob101 is offline Registered+ drbob101 0
    Join Date
    Dec 1969
    Location
    .
    Posts
    11

    Default Re: Cant seem to raise TA or PH



    Here is the rinsed off DE from the filter and I would say that that is liner color!! This isn't good.

    I dont have a circulate valve on my filter so I left the element out and have the filter running in basically circulate mode now.
    Last edited by PoolDoc; 03-03-2012 at 10:45 PM. Reason: Picasa
    Reply With Quote Reply With Quote
« High TA in fill water | Converting to salt with a very high CH »

Similar Threads

  1. Cannot seem to raise Ph
    By D_Case in forum Testing and Adjusting Pool Water Chemistry
    Replies: 2
    Last Post: 03-19-2012, 12:45 PM
  2. No CYA - How to raise it?
    By mortimay in forum Using Chlorine and Chlorinating Chemicals
    Replies: 5
    Last Post: 06-03-2011, 05:33 PM
  3. Should I raise my TA now?
    By halefmly in forum DPD-FAS based testing
    Replies: 5
    Last Post: 02-12-2007, 04:07 AM
  4. Can't raise ph
    By aguaguy in forum Testing and Adjusting Pool Water Chemistry
    Replies: 4
    Last Post: 09-05-2006, 11:30 PM
  5. Can't raise PH
    By aguaguy in forum Testing and Adjusting Pool Water Chemistry
    Replies: 2
    Last Post: 07-26-2006, 09:18 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules