Results 1 to 10 of 12

Thread: High TA in fill water

Threaded View

  1. 06-10-2010 02:00 PM #5
    AndyJ
    AndyJ is offline Subscriber AndyJ 0
    Join Date
    Jun 2010
    Location
    Minneapolis, Minnesota, USA
    Posts
    10

    Default Re: High TA in fill water

    Update: did a retest under more controlled circumstances. TA is really 400. Has anyone ever heard of TA this high? I'm wondering if this is something that must be lowered and what the consequences are if he does not.

    He mentioned that after shocking he gets a reddish/brown tint which coats his filter cartridge. The red rinses off and he puts it back in. I was assuming that is due to low levels of iron.
    Last edited by AndyJ; 06-10-2010 at 02:36 PM.
    Reply With Quote Reply With Quote
« Low calcium hardness in vinyl pool ok? | Cant seem to raise TA or PH »

Similar Threads

  1. If this was your fill water, what would you do?
    By Bosch232 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 14
    Last Post: 05-04-2013, 08:13 PM
  2. Fill with only 1 foot of water and don't fill for 24-48 hours?
    By Jacob99 in forum Above-Ground Pool Construction & Repair
    Replies: 3
    Last Post: 04-26-2012, 06:00 PM
  3. Ok to fill pool using well water?
    By DanNH in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 3
    Last Post: 06-19-2011, 11:45 PM
  4. New liner - fill with well water
    By ksturge in forum Testing and Adjusting Pool Water Chemistry
    Replies: 9
    Last Post: 05-23-2007, 02:19 PM
  5. my fill water test
    By gordyjamz in forum Testing and Adjusting Pool Water Chemistry
    Replies: 7
    Last Post: 07-23-2006, 01:09 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules