Another newbie

[PBLsQuad450]

Hi, Polly! I'm no mod for sure, but I would encoourage you to get CYA and add it yourself so you know exactly how much you are adding. You can calculate the amount per puck, and it is in threads here, but doing it seperately will give you quicker control and be more precise. Trichlor is a pool stores dream. This is from experience.

[pollywog1]

Yes that is what I am leaning to, just afraid I will go to far so since my kit only goes as low as 30 I know its less than that. I will say it is at 20 and I want to go to 40 so from the poolcalculator it says I should add 138 oz of liquid or 56 oz solid. I would prefer liquid.

So do I pour it straight into the skimmer( or dilute with pool water) or throughout the pool? Since my Cl is low should I chlorinate or stablize first? I was thinking of chlorinating tonight and then stabilizing in the am. Any thoughts?

[Watermom]

I would add less than you think it is going to take. Can always add more if you need it but can't remove it without a partial drain. I have never used the liquid so I'm not sure about adding it. Read the directions on the label. But, if you use the granular, you can either put it in an old sock and hang it in front of a return jet or pour it into the skimmer and let it dissolve in your filter. If you do it the second way, don't backwash for up to a week to be sure to give it enough time to dissolve.

It won't hurt to ahead and add both cl and stabilizer tonight. But, if you decide to only do one, do the chlorine tonight.

[pollywog1]

So I bought my granular CYA,poured it in a sock( all 3lbs) and have it dangling in front of the jet near the stairs. How long should I let it hang for. It seems from other posts that it will take forever to dissolve right? My CYA was at 0-20. Would removing it after 24hrs be ok and then testing in another 24 hrs? I will let the sock soak in a pail of pool water until I think I need it again.

[Watermom]

If it looks like a lot of it has been dissolved I guess you could go ahead and test for it but it typically takes awhile to dissolve. Sometimes up to a week.