Thanks for your replies! OK, I just tested it over and over and over. I added bleach last evening. So my FC now reads 2.5. Here is what I think is the deal, I think it is exactly the same for TC after the next test, but the color degrades VERY, VERY quickly. I can watch it go from 2.5 (and I mean immediately after adding, invert and check) down and down. The instructions do say re: 0003 to check "immediately" and record as... Boy, they ain't kidding. It is a little easier to identify it with even this slightly higher CL level. I am going to add more bleach later and re-test. It might be more evident at 3+. And, following the directions EXACTLY.

Oh, and isn't it a good thing if FC and TC are equal?

Again, THANKS!!