I have a question about my first numbers from my new "real" test kit. My chlorine readings came out much lower than I expected. I had been using an OTO and test strips. These agree that my TOTAL CL is between 5 and 10. My new kit, and I checked it twice, FC 2, TC 1. Spot on both tests.

Total numbers for a 33,000 gallon, IG v-liner, no heater, full sun.

FC-2
TC-1
PH-7.1
TA-60
CYA-100

Base demand was 5 drops. According to the Taylor chart included, that coincidentally translates to exactly 1 box of Borax. PH was actually spot on and I was draining water and refilling. Ugh.

Darn CYA. Was higher. Been partial draining. It is the reason I sought and found PF. Any feedback would be great. THANKS!!