+ Reply to Thread
Results 1 to 10 of 11

Thread: Deciding on a safety cover

Hybrid View

  1. #1
    Join Date
    May 2010
    Posts
    9

    Default Deciding on a safety cover

    just talk to the local pool guy and he quoted me 1800 for any safety cover or style that I want. Leaning towards solid with drain or pump. Any recommendations?
    Thanks guys!

  2. #2
    Join Date
    May 2010
    Posts
    23

    Default Re: Deciding on a safety cover

    i installed my 16x32 ig saftey cover myself. I went with a mesh but wish i went solid. I chose mesh on price, but also weight, since a solid cover is very heavy to handle. I feel that with a solid cover you get less algae growth potential in the spring before you open the pool. I know if you keep the chorine up you probally wont have any issues, but i always neglect to do this.
    Other than that reason, mesh is not a bad option.
    It was a little bit difficult to drill and measure it out but well worth the savings

  3. #3
    waste is offline PF Support Team Whizbang Spinner waste 3 stars waste 3 stars waste 3 stars
    Join Date
    Dec 1969
    Location
    S.E Maine
    Age
    58
    Posts
    1,765

    Default Re: Deciding on a safety cover

    Welcome to the forum!

    There are ways to avoid the 'swamp' in the spring that many mesh covers bring. Let us get through helping the pool owners here clear up their pools and we can discuss those ways
    Luv & Luk, Ted

    Having done construction and service for 4 pool companies in 4 states starting in 1988, what I know about pools could fill a couple of books - what I don't know could fill libraries

  4. #4
    hzz is offline Lifetime Member Thread Analyst hzz 1 star
    Join Date
    Dec 1969
    Location
    Toronto Canada
    Posts
    66

    Default Re: Deciding on a safety cover

    I went with mesh. What I like about mesh is no pumps or drains, and a lot lighter to handle.

    The other good thing about mesh is that after the snow melts the water level in the pool is usually back up to where it should be, saving me form having to refill in the spring.

    The downside of mesh is that you can open your pool to a green swamp. The way I have found to avoid this is to open the pool early. As soon as the weather allows I open, and find very little, if any algea. The water temp is usually under 50 when I open so you don't seem to get algae growth at such a low temperature. Works for me, anyway.

    Hope this helps

    Zane

  5. #5
    Join Date
    Apr 2006
    Location
    St. Louis, Missouri
    Posts
    9

    Default Re: Deciding on a safety cover

    I have a solid cover and wish I had mesh. It easily weighs over 175 lbs and is just way too cumbersome. I've heard newer solid covers a a bit lighter but don't have experience with those. I have a nice coating on my pool deck and the solid cover actually is so heavy it has worn into the coating. Also if you go this route and use a pump I'd recommend removing the screen that is supposed to filter small debris as it clogs up too often. Never had much of a problem with the screen removed.

    Good luck

    Craig

  6. #6
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: Deciding on a safety cover

    But, the mesh ones have a down side, too. (Everything has a down side.) With the mesh ones, dirty water enters the pool during the winter and requires more initial clean-up in the spring.

    The past two winters I have actually not even bothered covering my AG pool. I happen to know that Poconos does not cover his IG pool either. I just scoop the leaves out in the fall and then just leave it. Yes, there is a little dirt on the bottom in the spring but the water is still clear. A couple of good vacuums and we're good to go. Just another option.
    Last edited by Watermom; 06-29-2010 at 01:01 AM.

+ Reply to Thread

Similar Threads

  1. Safety cover for AB pool
    By tnt69 in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 02-27-2013, 11:26 PM
  2. Best Safety Cover
    By JenLM in forum Pool Equipment & Operations
    Replies: 5
    Last Post: 09-26-2011, 09:26 PM
  3. safety cover really stretching
    By edarling in forum Pool Equipment & Operations
    Replies: 5
    Last Post: 03-25-2007, 12:01 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts