Okay here's the #'s I read from the dye tester I bought after vacuming the pool.
PH between 7.2 -7.6
BR/CL 6.5/3.0. (this was brite yellow)

So not knowing what to add I had a sample tested at the store and here's their #'s.
Temp 75
Saturation Idx 0.3
TDS not tested
CYA 10
Tot. Chlorine 4.6
Free chl. 4.6
PH 7.9
Total Alkalinty 110
Adj. Akal. 107
Total hardness 200
So after all that I bought a PH reducer and added 1.25 lbs
Then added 2.5 lbs of 100 Stabilizer and broadcast 1.25 lbs and socked 1.25 lbs
Filter pressure reads 14lbs.
will run filter for 24hrs and recheck the numbers
but still after 30 mins of filter runtime I have these brown deposits already
so there ya go guys and gals any help ??
Thanks Mrdwkds.